Happymodel & HDZero
Happmodel & HDzero Mobula6 ECO 2024 1S 65mm Ultra-Light Micro HD FPV Whoop
Happmodel & HDzero Mobula6 ECO 2024 1S 65mm Ultra-Light Micro HD FPV Whoop
Couldn't load pickup availability
Note: The ETD will be around end of March, 2024
The Mobula6 ECO 2024 redefines indoor FPV flying with its ultra-light design and the pioneering HDZero ECO system. This micro FPV Whoop is engineered for enthusiasts seeking the ultimate flight experience, combining high-definition digital visuals with the agility and speed of a competitive racing drone.
Mobula 6 ECO 2024 is the first BNF that uses HDZero ECO Bundle.
HDZero ECO Bundle is designed to bring digital FPV to more pilots by offering a low cost, light weight, and durable alternative to analog video. The digital video signal has stable color reproduction and 720p progressive scan video with the low latency HDZero is known for.
Unmatched Digital Clarity with HDZero ECO Bundle
- 720p Progressive Scan Video: Immerse yourself in stunningly clear FPV footage with vibrant colors and detail, thanks to the HDZero ECO Bundle’s digital video transmission.
- Stable and Low Latency: Experience real-time flying without compromise. The HDZero technology ensures stable, low latency video, perfect for competitive racing and intricate maneuvers.
- Durable and Lightweight: Specifically engineered for ultra-light drones, the ECO FPV System minimizes weight without sacrificing durability, crucial for dynamic indoor flying.
Product Features
- All-in-One Flight Controller: Comes with a Serial ELRS Receiver, fully compatible with the HDZero system.
- Lightest Brushless Motors: Equipped with SE0702 motors, each weighing only 1.49 grams, for smooth and powerful performance.
- HDZero ECO VTX and Camera: The first of its kind, offering HD composite video signal without the need for delicate MIPI cables.
- Designed for 1S Lipo/LIHV: Optimized for efficiency and power, extending your flight times.
- Onboard Blackbox Ready: For easy diagnostics and performance tuning.
Specifications
- Co-Branding: HDZero and HappyModel
- Model: HDZero Mobula6 ECO 2024
- Weight: 23.16g (without battery)
- Size: 81mm x 81mm x 45mm
- Battery Compatibility: GNB A30 plug for 1S batteries
|
Motor |
Mode: SE0702 KV28000 |
|
Propellers |
Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm |
|
Flight controller SuperX HD ELRS |
Betaflight 4.4.2 firmware ready Firmware target: CRAZYBEEF4DX Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update Bluejay ESC Firmware ready No betaflight analog osd chip |
|
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) |
|
Onboard Serial ExpressLRS 2.4GHz Receiver |
RF Frequency: 2.4GHz Antenna: enameled copper wire 31mm length The same hardware with Happymodel EP1 receiver Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through |
|
HDZERO ECO VTX |
Composite HD Video interface 1S-3S Input 25mW/200mW RF output 25.5x25.2 M2 soft mounting Antenna Retention 32.4x32.5mm (29x29mm inner) 4.5grames/4mm Thickness (w/o shielding) |
|
HDZERO ECO Camera |
Image Sensor 1/3” Resolution: 720@60fps 4:3 LENS: FOV D:150° H:120° V:98° Shutter: Rolling Shutter Net Weight: 1.6g (With Cable) Dimensions: L14mm*W14mm*H13mm |
What’s Included
- Mobula6 2024 1S 65mm Whoop Drone Frame + Canopy
- SuperX HD ELRS AIO Flight Controller
- HDZero ECO VTX
- HDZero ECO Camera
- SE0702 KV28000 Brushless Motors (x4)
- Gemfan 1208-3 31mm Tri-Blade Propellers (4cw+4ccw)
- Spare Canopy, Screwdriver, Propeller Disassemble Tool
